Hours of Operation:
Monday to Friday 9:00 am to 4:00 pm
Saturday & Sunday Closed

Since 1990, we've helped alleviate pain and restore mobility, for people of all ages.

Nipissing Orthopaedic Lab features the most highly qualified professionals in the field of orthotics and prosthetics in Northeast Ontario.

We keep you moving, and enjoying life with tailor made solutions to fit your goals and lifestyle.

Experience the difference Certified Orthotists and Prosthetists offer by calling us today for a free consultation.

Bilingual service.

How We Keep You Mobile

How We Keep You Mobile

An "orthosis" or "orthotic" is a device used to support, align, protect, correct or improve function of a body part.

Since 1990, Nipissing Orthopaedic Lab is one of those rare facilities that custom-makes orthoses (braces) for all levels of the body including hand-made foot orthotics for your feet.

When custom-made is not needed, we feature the finest pre-fabricated braces the world has to offer.

We sell fine Orthopaedic footwear, diabetic suitable footwear, specialty footwear and custom made footwear.

We specialize in off-loading and treatment of diabetic foot ulcers.

We also fabricate and maintain artificial limbs including prosthetic devices for partial foot amputations.

Our specialized training allows us to access funding through the Ministry of Health and Long Term Care's Assistive Devices Program (ADP). Please note: We are the only health care professionals in this line of work that can access public funding for much of what we do. We’re also authorized vendors with WSIB, ODSP, Veteran's Affairs, Native Affairs, private health insurers, and more.

Our Accreditation and Team

Our Accreditation and Team

No other service provider in our area has the level of training that we do.
Our certification with OPC - Orthotics Prosthetics Canada - is the highest standard of qualification available in the field of prosthetics and orthotics in Canada and in fact the world.

The International Society for Prosthetics and Orthotics (ISPO) developed new education standards in 2018. To date only four institutions in the world have been accredited at the Prosthetist/Orthotist category with the new standards. In OPC's case, the ISPO accreditation applies to the entire CBCPO certification pathway.

Orthodics and Prosthetics Canada
Learn more about OPC here.

In Ontario, the Ministry of Health (MoH) and Long Term Care recognizes the designation of Certification in Prosthetics and Orthotics.

This allows Certified Orthotists and Prosthetists to bill the MoH for custom made prosthetic and orthotic devices when required for chronic physical disabilities and prescribed by a doctor or nurse practitioner.

Certified Orthotists and Prosthetists are the only professionals in this field that are allowed to access public funds for custom made orthopaedic appliances and prosthetic devices.

Our Team

Clinical Staff

Marc Tessier Certified Orthotist and Prosthetist CPO (c)

Marc Tessier

Marc brings almost four decades of experience as a clinical professional in the field of prosthetics and orthotics. Our clients instantly sense that he cares about them on an individual basis, and it shows in his thorough and careful approach to any injury or ailment he is helping someone overcome.

He is a graduate of the George Brown College Clinical Methods in Orthotics and Prosthetics program. Marc has served as President of the Ontario Association of Prosthetists and Orthotists, and National Internship Chair with the Canadian Board for Certification of Prosthetists and Orthotists.

In his spare time, he loves music and plays in a local band. He also enjoys travel and spending time with his wife and getting together with their adult children.

Karen Boehm Certified Orthotist CO(c)

Karen Boehm

Karen brings a level of professionalism and care that our clients truly appreciate. She is a graduate with Honours from the University of Western Ontario in Kinesiology in 1994, graduate from the Clinical Methods in Orthotics and Prosthetics program at George Brown College in 1997 and gained her Canadian Certification in Orthotics in 1999.

When not keeping people mobile and enjoying life, she spends quality time with family, enjoys movies and outdoor activities.

Thomas McManus Biomedical Engineer and Orthotic Resident

Thomas McManus

Thomas is a strong addition to our team here at Nipissing Orthopaedic Lab. He is currently a Resident Orthotist and is completing 3,450 hours of training under the guidance of Marc Tessier and Karen Boehm. Thomas loves North Bay - he lived in big cities but enjoys our outdoor quality of life. Thomas got his undergraduate degree from the University of Ottawa in Biomedical Mechanical Engineering and then went to George Brown College to get his technical and clinical training.

Technical Staff

Dan Groleau Registered Prosthetic Technician RTP(c)

Dan Groleau

Dan brings a combination of passion, precision and professionalism in all that he does at the lab. As a Registered Prosthetic Technician with OPC, he carries the highest qualification that you can have in this domain in Canada.

Peter Dicht Orthotic Technician

Peter Dicht

Peter Dicht, is our Orthotic Technician with unmatched attention to the tiniest details. This might come from the fact that he was an accomplished tool and die maker from Germany. He is also a renowned archery coach and judge.

Kurtis Summer Client Service Technician + IT

Kurtis Summer

As our Client Service Technician and computer expert, Kurtis is an integral part of the technical team. His calm demeanour and gentle approach when working with clients instantly puts them at ease.

Administrative Staff

Manon Dufour Office Manager

Manon Dufour

Manon carries the large responsibility of overseeing all of the background office and administrative roles that keep Nipissing Orthopaedic Lab running as one of the most efficient, respected orthotic and prosthetic service providers in the country. Her knowledge of various medical coverage plans and benefit plans is a strong asset when helping clients navigate their options.

Carol Lukach Reception

Carol Lukach

Carol brings a friendly professional approach to handling the front line reception role at our office. She understands that when people are first visiting, they are often under stress, pain, or both. She strives to make every customer feel welcome and relaxed from the moment they arrive to the moment they set up their follow-up appointment in both official languages.

Why Our Solutions Matter

Why Our Solutions Matter

Since 1990, we've been giving our clients the ability to remain active and improve their overall quality of life. Essentially, we help alleviate pain and restore mobility. Many of our patients face a life-changing injury, chronic condition, or other challenges that can leave them worried about how they will manage. Once they realize what we can do for them, it opens up a world of hope.

With our team of professionals, we have decades of experience- and a proven track record - of helping our clients in many ways.

Testimonials

The staff at Nipissing Orthopaedic Lab pretty much worked miracles for me. I suffered a unique and traumatic foot injury that could have left me severely mobility limited. With their care and patience, over several months, they kept me moving every step of the way. Now, with unique, custom designed footwear made precisely for me, I can drive, work, serve on volunteer boards and do virtually all of the things that I enjoy in life. I cannot say enough about what they've done for me.

Mike A.

Bryan HLiberation! Unassisted Mobility!
Thanks to Marc Tessier and his team at Nipissing Orthopaedic Lab in North Bay, I am back at work and feeling great. I am a below knee amputee and I am a letter Carrier for Canada Post.

Bryan H

Because of a medical condition, I need custom orthotics and custom orthopaedic shoes. For this reason, I was referred to the Nipissing Orthopaedic Lab. Seeing Karen Boehm was the best decision I ever made! Karen listens, ask questions, and truly understands my needs. I would recommend Nipissing Orthopaedic Lab to anyone.

Suzanne G.

I just want to thank everyone for getting me in to get my replacement foot on such short notice. It has been a wonderful experience working with your group, and, I appreciate all the help, encouragement and professionalism I have been shown since this whole journey began. I never, ever, expected the change for the better my life has been since I received my prosthetic!

Dave L.

Michel M.Watching my husband Mike heading to the bathroom with his legs hardly able to get him there, I (his wife) felt tears coming to my eyes and I had to turn away. After seeing Thomas making and freeing him with a full leg brace and a lower leg brace the tears turned to joy and gratitude. We both recommend Nipissing Orthopaedic Lab and the great work that they do there.

Michel M.

I was born with a spinal and foot condition that requires me to find skilled help in order to keep me walking. Marc and his team at the Nipissing Orthopaedic Lab are not only skilled experts, but they care about their clients. Without their assistance I would not be walking today. My standard of living and quality of life are improved immeasurably by the products and care I receive from Nipissing Orthopaedic Lab.

Carl S.

Trusted to Serve Other Cities

What we do is unique in North Bay, Nipissing, and much of the northeast. So is the high level of training and professionalism we bring to what we do.

That's why we are entrusted to serve clients in underserviced areas, including:

If you reside in one of these outlying areas, call our office to get information on how your local health care professionals could assist you in accessing our services and our solutions.

Frequently Asked Questions

Foot orthotic (arch support, footbeds) are made in a variety of ways usually depending on the experience, skill level, and facility set up where the health practitioner works. The Certified Orthotists at Nipissing Orthopaedic Lab Inc use the plaster of Paris slipper cast impression technique. We feel that this technique is the gold standard for foot impression because it allows the practitioner to maintain the foot in an optimal alignment and off-load problematic pressure areas of the foot during the process. Everyone’s optimal alignment varies as much as individual fingerprints do. There are other techniques such as foam box imprint, wax mould imprint, and pressure computer "dimpling" – but we rarely use these other techniques for impression taking.

These Plaster of Paris slipper casts then become the basis on which your orthotic is vacuum moulded. We laminate various layers of materials to create your device. The materials range from very soft foam laminates for rigid feet to very firm plastics and rubber base materials for hypermobile feet, where more control is needed.

The foot orthotic industry was exclusively in the realm of the Orthotist until approximately 25 years ago. Today, with the advent of computerized foot pressure digitizing and access to central fabrication services, all allied health professionals have the ability to fit foot orthotics. However, the best service will be provided by those who actually fabricate the foot orthoses they deliver.  Certified Orthotists have been hand-crafting all appliances they deliver since the profession was created after World War II and the polio epidemic in the late 1940s and early 1950s.

This is a complex question because there are many variables to consider. Essentially, if you have foot alignment issues, family pre-disposition leading to foot deformity and pain or chronic leg, back or foot pain, then the answer is yes. If you have normal foot alignment, flexibility, and still have foot pain, then structured Orthopaedic footwear and stretching or strengthening exercises are indicated for you. We routinely refer clients to physiotherapists for assessment of the feet when chronic or acute foot pain is expressed and normal foot mechanics are evident.

The decision regarding the need of an orthopaedic appliance often starts with a discussion with your Doctor or other health professional. This referral becomes the basis from which an individualized orthotic treatment protocol will be prepared by our clinical staff. This protocol involves careful history taking and performing a variety of physical assessments by the Orthotist clinician. From there a decision regarding the need for a prefabricated or custom made appliance is made.

Prefabricated or off-the-shelf appliances can be in stock or specially ordered. These devices are ordered from a large number of American and European manufacturers. Our clinicians are always on the look out for new concepts and approaches for the treatment of acute or chronic physical ailments with off-the-shelf devices. Prefabricated appliances however are a very small part of our business. The majority of appliances that we dispense are custom made, in house, by our specialized orthotic technicians.

Custom made appliances can range from the smallest (but very effective) custom toe separators to full spinal immobilization body jackets. The most commonly braced body parts in order are the feet, the ankles, the knees, the low back and spine, the wrists, and the elbows. The hips and shoulders are only braced in rare instances.

This custom brace manufacturing and dispensing specialization is what we do best. We prefer to make our own devices which usually involves impression taking the involved body segment or segments with plaster of Paris or fiberglass casting materials. We often also take limb tracing and measuring using calipers and measuring tapes.

The body segment cast is then filled with plaster of Paris slurry, allowed to harden and prepared for modification. Positive cast modification is a complex procedure which allows the clinician to safety load and off-load areas that are being braced, in order for the appliance to correctly function as needed. This is the art part of our profession and a major part of what we learn at our clinical prosthetic and orthotic schools.

The modified positive cast is then brought to a different section of the lab where our technicians oversee the manufacturing which often consists of vacuum molding plastics, foam and other materials. The cooled molded components of the brace are then cut away from the positive cast and reassembled, trimmed, polished and riveted together. Various straps, joints and uprights and other function mechanisms are then added prior to the appliance being ready for dispensing.

Prosthetic appliances are an amalgam of three distinct parts. The socket in which the residuum (stump) is housed, the components that replace lost limb segments, and the suspension method that retains the prosthesis in place on the body. All three aspects of a prosthesis are uniquely designed and adapted for each amputee.

The socket for the prosthesis is made from casting the amputee’s residuum using plaster of Paris in order to produce a mold of the involved segment. This process is very similar to the way that a body segment is casted for an orthopaedic appliance.This positive mold is modified to offload certain body parts and to load others. This way, a prosthetic socket can safely allow an amputee to stand without damaging underlying tissue of the residuum. The art of offloading an amputated limb is constantly evolving, but generally you have total surface bearing sockets or area specific loading sockets.

The prosthetic technician will take this modified positive cast and initiate the manufacturing of a prosthetic socket.

New amputees will undergo rapid limb atrophy after amputation very much in the same way that your arm will atrophy when wearing a cast, while healing from a bone fracture. This will necessitate more frequent socket changes initially in the first 3 to 5 years after amputation.

Years ago you would have received an open ended, carved wood socket or possibly even a hand hammered aluminum socket. Today’s laminated sockets are made of a mix fiberglass, Kevlar, nylon and carbon fiber, as well as thermoplastics and blends using silicone and polyethylene.

Socket/residuum inter phase materials have also evolved dramatically with antibacterial and anti odour silver particles imbedded into thermoplastics and as thread lining in stump socks. Also, a wide variety of silicone and urethane gel liners have made prosthetic device wearing much more comfortable thereby allowing activities that were formally very difficult to do such as running with your prosthesis.

Prosthetic components replace the lost joint segment below the residuum. Components consist of prosthetic joints, prosthetic feet, upper extremity terminal devices which includes hands and hooks, pylons and adapters that connect all the components together. Components are manufactured by a number of European, American and Asian manufacturers. Function, cost, and complexity vary enormously and depend on numerous functional, physical and economical variables.

Prosthetic suspension is quite variable and is often dependent on body shape, functional abilities and amputation type. They consist of belts, straps, cuffs, bony anatomy wedges, suction valves, ratcheting pins, lanyards and sleeves. The prosthetist will decide on which suspension type is best suited to an amputees needs, taking into consideration the amputee’s residuum type and shape, patient abilities and desired functional outcomes. Then again there is a newer technique that you can look up online consisting of direct bone attachment called osseointegration. This is mostly done in Scandinavia but gaining momentum in North America.

There are two main groups of amputees, acquired amputations or amputations that are congenital in origin. Congenital amputations are self-explanatory while acquired amputations can be divided into 2 groups, trauma and through the disease process. In Canada, the vast majority of amputation occur as a result of vascular compromise as a result of large or small blood vessel diseases such as Diabetes Mellitis, Peripheral Vascular Disease and from smoking. The average age for an amputation in Canada is around 70 and most amputations are of the lower extremities.

Although there are a huge number of physical ailments that are treated by Certified Orthotists, a number of generalizations can be made in regards to how orthopaedic footwear and orthotics help the human body.

Mankind has seen tremendous changes in lifestyle since the advent of the industrial age about 200 years ago. These changes have necessitated greater amounts of time standing on increasingly harder surfaces. Prior to the start of the industrial age, people were intensely colloquial, meaning that they lived their entire lives generally within a small radius of where they were born. Most time was spent on softer ground surfaces and on irregular ground surfaces. The softer ground surfaces tended to minimized the impact of walking and standing on the lower extremities. Today, modern people spend most of their time on much harder surfaces such as concrete, ceramic tile, and hardwood floors. This, coupled with a recent trend towards softer and flatter shoes to accommodate these harder surfaces, an aging demographic, and increasingly sedentary lifestyles, has led to a situation where a good percentage of the population suffers from back, leg, and foot ailments.

The ground reaction forces imparted through hard ground surfaces while standing and walking are transmitted up the legs and into the back are not being reduced by the softer-soled footwear that we have adopted of late. Also, people with biomechanical misalignment of the feet and lower extremities are especially prone to the development of connective tissue strains and pain and degenerative joint changes throughout the lower extremities and back, as a result of wearing unsupportive softer soled footwear over long periods of time. Repetitive work activities, poor posture and weak abdominal core strength are other major factors that lead to lower extremity ailments and back strain and pain.

Orthopaedic footwear maintain the feet in optimal alignment and reduce strain in the lower extremities and spine. As a result, most active adults will benefit from wearing orthopaedic footwear.

Orthopaedic footwear with or without a foot orthotic, provide the body with structure where it is needed most, at the bottom of the kinetic chain, at the feet and ankles. This structured footwear stabilizes and aligns the body in a proper way, thereby reducing strain higher up the body. The thing to remember with structured orthopaedic footwear and/or foot orthotics is that wearing them indoors is just as important as on the job and away from home. We spend around 8 hours sleeping, 8 hours at work and approximately 8 hours of time doing leisure activities per day. Older or retired persons spend even more time indoors, especially in winter. Not wearing structured footwear indoors allows undesirable forces to act unabated on the body and I always urge my clients to wear structured footwear indoors as well as out of doors.

Functional foot orthotics reduce strain and pain and can counter deforming forces caused by faulty foot alignment issues. This is very important because these alignment issues lead towards premature joint degeneration within the foot or up into the knees, hips, and back, with age. Functional foot orthotics are quite complex in their own right and require the skilled knowledge of a Certified Orthotist to properly assess, prescribe and dispense these biomedical devices. Not everybody will need to wear custom made functional foot orthotics, but most people will benefit from wearing orthopaedic footwear indoors and outdoors on a daily basis.